What Is Drag Factor?

CONCEPT 2 ROWER

For more than two decades now, Concept2 has been in the business of developing the worlds' best, affordable, durable and smoothest operating rowing machine. First the Model A in 1981, followed by the B in 1986, and the C in 1993. Their best yet, Model D was introduced in 2003. With a new perormance model, and quieter flywheel enclosure, it rates as one of the best machines available on the market today. Experience for yourself the great feeling, getting fit with rowing, experience the Concept2 Model D Rowing Machine today!

FREE GROUND SHIPPING
On All Concept 2 Rowers for a limited time only! Sale Ends Soon So Take Advantage of Our Offer and Order Your Concept 2 Rowers Today!

BUY GIFT CERTIFICATES

What is Drag Factor?

Drag factor can be viewed by turning the monitor on, waiting for zeros to be displayed, and pressing the READY and REST buttons simultaneously. A "DRAG" enunciator will appear in the lower right corner. Now, take a few strokes and look at the value in the lower right corner. A brand new Indoor Rower will have a drag factor of about 90-100 at the 1 damper setting, and about 210-220 at the 10 setting.

Suppose you are at your first Indoor Rowing race. You get on your designated Indoor Rower and set the damper at 3, the same setting you have been using on your rower at home. You notice after a few pulls that a damper setting of 3 on the race machine feels like a damper setting of 4 on your home machine.

It is very possible that your feeling is correct, because the race machine may have a different drag factor range than the home machine.

Drag factor is a numerical value for the rate at which the flywheel is decelerating. This number changes with the volume of air that passes through the flywheel housing. Since higher damper settings allow more air into the flywheel housing, the flywheel decelerates more quickly, resulting in a higher drag factor value. The electronic Performance Monitor measures the drag factor on the recovery phase of each stroke and uses it to calculate your score. This method of "self-calibration" compensates for local conditions and damper settings, making scores on different Indoor Rowers comparable. Indoor racing and the Online Community are made possible by this method of self-calibration.

There are a number of conditions that can affect the drag factor:

Air temperature- Cold air is dense, so, an Indoor Rower with a drag factor of 120 at damper setting 3 at room temperature will have a higher drag factor at 50 degrees F.
Elevation/Barometric Pressure- Air at higher elevations is less dense, so, an Indoor Rower that is moved from Boston to Denver will have a lower drag factor range in Denver.
Wind- Air that already has some movement to it will give a lower drag factor, such as rowing outdoors on a windy day or rowing in close proximity to another Indoor Rower.
Lint- If your Indoor Rower is in a high-use or dusty location, lint and dust can get pulled in through the screen on the damper side of the flywheel cover. Much of this material passes back out the finer mesh screen that surrounds the flywheel, but some of it gets caught inside, building up over time and restricting airflow. This has the same effect on the drag factor as closing the damper down and can easily be remedied by removing the flywheel cover and vacuuming out the lint buildup.

Luckily, the monitor compensates for all of these variables by using the appropriate drag factor in calculating your score, but you may need to change the damper setting to make different Indoor Rowers feel "right" to you.

It is important to note that, unlike weight lifting, the goal is not to use a higher drag factor as a means of achieving fitness on the Indoor Rower. It is much better to work with lower drag factor settings (110-140) while improving your speed, form and muscle coordination. Many of the world's top heavyweight competitors use settings in this range.

Much like selecting a gear on a bicycle, drag factor is a personal choice. You should experiment with different damper settings (and resulting drag factors) in order to find the setting that works best for you.